Moving an Adjustable Bed Frame: The Complete Safe Moving Guide
Moving an Adjustable Bed Frame: How to Do It Safely Without Damaging Your Base
Moving is stressful enough. Moving a 100-lb adjustable base with motors, wiring, and a wireless remote system is a different kind of challenge entirely.
The good news: moving an adjustable bed frame is completely doable — if you follow the right steps. The bad news: most people don’t, and end up with damaged motors, bent frames, or disconnected wiring that voids their warranty.
This guide covers everything — from disassembly to transport to reassembly — so your Viva Elite Adjustable Bed Base Frame arrives at its new location in exactly the same condition it left.
Before You Move: What You Need to Know About Adjustable Base Weight
- ✔ Viva Elite Queen weight: 106.9 lbs — requires two people minimum
- ✔ Viva Elite Full weight: Approximately 85–90 lbs
- ✔ Viva Elite Twin XL weight: Approximately 70–75 lbs
- ✔ With mattress: Add 60–150 lbs depending on mattress type — always move separately
- ✔ Rule: Never move the base with the mattress on it — always separate first
- ✔ Equipment needed: Moving straps, furniture dolly, moving blankets, packing tape
How to Move an Adjustable Bed Frame: Step-by-Step
📍 Phase 1 — Preparation (Day Before)
- ✔ Gather supplies: Moving blankets (4–6), packing tape, moving straps, furniture dolly, zip ties or velcro straps for cables
- ✔ Photograph your setup: Take photos of the cable routing, remote placement, and leg configuration before disassembly
- ✔ Plan your route: Measure doorways, hallways, and stairwells. The Viva Elite Queen is 59"W × 79"L — confirm it fits through your exit path
- ✔ Recruit help: Two people minimum. Three is better for stairs.
📍 Phase 2 — Disassembly
- ✔ Step 1 — Return to flat position: Use the remote to return the base to fully flat (0° head, 0° foot) before doing anything else. Never move an inclined base.
- ✔ Step 2 — Remove mattress: Slide mattress off the base and move it separately. Stand it upright against a wall.
- ✔ Step 3 — Unplug power: Disconnect the power cord from the wall outlet. Coil the cord and secure with a velcro strap.
- ✔ Step 4 — Secure the remote: Place the wireless remote in a padded bag or wrap in bubble wrap. Keep it with you — don’t pack it in a box with heavy items.
- ✔ Step 5 — Remove legs: Unscrew the adjustable legs and pack them together in a labeled bag. Note the height setting before removing.
- ✔ Step 6 — Secure cables: Use zip ties or velcro straps to bundle any loose cables against the frame.
- ✔ Step 7 — Wrap the base: Cover the entire base in moving blankets, paying extra attention to the motor housing and corner joints. Secure with packing tape (not directly on the frame).
📍 Phase 3 — Transport
- ✔ Use a furniture dolly: Never drag an adjustable base across the floor — the motor housing and frame joints are vulnerable to impact damage
- ✔ Transport flat when possible: Lay the base flat in the moving truck — do not stand it on its side for extended periods
- ✔ If standing upright is necessary: Stand on the foot end (not the head end where the motor is typically housed) — maximum 2 hours upright
- ✔ Secure in the truck: Use moving straps to prevent the base from sliding during transit
- ✔ Protect from other items: Don’t stack heavy boxes on top of the base — the motor housing is not designed for compression loads
- ✔ Temperature: Avoid leaving in an unventilated truck in extreme heat (above 100°F) for extended periods
📍 Phase 4 — Reassembly
- ✔ Step 1 — Position the base: Place the base in its new location before reattaching legs — easier to maneuver without legs
- ✔ Step 2 — Reattach legs: Reinstall at the same height setting as before (refer to your photos)
- ✔ Step 3 — Route cables: Refer to your pre-move photos to restore original cable routing
- ✔ Step 4 — Connect power: Plug in the power cord and confirm the indicator light activates
- ✔ Step 5 — Re-pair remote: If the remote lost pairing during the move, follow the pairing instructions in your manual (typically hold the pairing button for 5 seconds)
- ✔ Step 6 — Test all functions: Head up, head down, foot up, foot down, zero gravity preset — confirm full range of motion before placing mattress
- ✔ Step 7 — Place mattress: Slide mattress onto base and secure with anti-slip rails
- ✔ Step 8 — Final test: Run through all positions with mattress in place — confirm no obstruction from new room configuration
Moving Adjustable Bed Frame: Common Mistakes to Avoid
- ✔ Moving while inclined: Always return to flat before moving. An inclined base is structurally compromised for transport.
- ✔ Moving with mattress on: The combined weight exceeds safe two-person lifting limits and can damage the frame joints.
- ✔ Dragging across floors: The motor housing sits close to the base bottom — dragging causes direct impact damage.
- ✔ Standing upright for long periods: Extended upright storage can stress the motor mounts and cable connections.
- ✔ Forgetting to re-pair the remote: Power interruptions sometimes reset the remote pairing. Test before placing the mattress.
- ✔ Skipping the function test: Always test full range of motion in the new location before sleeping on it.
Relocating Adjustable Bed: Moving to a New Room vs. Moving to a New Home
- ✔ Same-room repositioning: Return to flat, remove mattress, slide on furniture sliders to new position. No disassembly required if staying on same floor.
- ✔ Different room, same floor: Remove mattress, use furniture dolly, navigate doorways. Check doorway width against base dimensions before starting.
- ✔ Different floor (stairs): Full disassembly recommended. Three people minimum for stairs. Consider professional movers for bases over 100 lbs.
- ✔ New home (truck move): Full disassembly and wrapping required. Follow all Phase 1–4 steps above.
- ✔ Long-distance move: Consider professional white-glove moving service for adjustable bases — the cost is worth it compared to motor repair or replacement.
💎 The Viva Elite Difference
- ✔ Tool-free assembly: Disassembles and reassembles without tools — faster moves, less frustration
- ✔ Adjustable legs: Remove for transport, reinstall at exact same height setting
- ✔ Durable frame construction: High-grade steel withstands the rigors of careful relocation
- ✔ Simple remote re-pairing: If pairing is lost during the move, re-pairs in seconds
- ✔ Quality-inspected: Built to last through moves, not just showroom demos
Moving is a fresh start. Your Viva Elite moves with you.
Explore the Full Viva Elite Adjustable Bed Base Frame Collection →
Limited Collection. Quality-Inspected. Exceptional Living.